Enjoy healthy air cleaned from 100 pollutants
Hassle-free automatic filtration
– CADR for PM2.5: 16 m3/hour
– CADR for TVOC 11 m3/hour
– CADR NO2/SO2: 13 and 7.9 m3/hour
– formaldehyde 6 m3/hour
Filters harmful PM2.5 fine particles in less than 10 min.
Philips unique SelectFilter Plus filtration technology quickly and effectively removes particles detected in the car cabin, such as PM2.5. With a Clean Air Delivery Rate (CADR) of 16 m3/hour for PM2.5, 50% of a standard sedan or SUV is filtered in less than 10 minutes. Not only does it remove harmful particles, but also cigarette smoke and dust so that you breathe fresh and clean air.
Remove ultra-fine particles, bacteria and viruses
Fine inhalable particles pose the most serious health risk, because the can get deep into the lungs. Philips filter technology also removes ultrafine particles, bacteria or viruses as small as 0.015 m (15nm) from the air inside your car. This includes airborne viruses such as influenza A or SARS coronaviruses, hepatitis B and foot and mouth disease (FMD)*
Quickly remove toxic gases like exhaust fumes from your car
Philips unique SelectFilter Plus technology includes a HESA layer. This decontaminates your car of harmful gaseous chemicals. Through a powerful absorption and oxidation process, it removes harmful gaseous substances at a Clean Air Delivery Rate of 11 m3 per hour. So in just a few minutes it cleans the air of car exhaust fumes, chemicals emitted by plastic materials and other odour-emitting substances, e.g. volatile organic compounds (VOCs), toluene and formaldehyde.
Removes harmful NO2/SO2 fumes coming from traffic
Who wants their family to breathe exhaust gases from heavy traffic? The car fan creates an air flow from the outside in and blows toxic gases from the traffic of cars and lorries into the car cabin. These fumes then stay trapped inside the car. Children sitting in the backseat of vehicles are likely to be exposed to dangerous levels of air pollution that are much higher inside the car than outside. Philips SelectFilter Plus technology treats nitrogen dioxide (NO2) at a CADR of 13 m3 per hour and sulphur dioxide (SO2) at 7.9 m3 per hour, so that you and your family can breathe with confidence.
Airmid certified filter removes 90% of airborne allergens
Independently tested by the respected biomedical research organisation, Airmid Healthgroup, the Philips unique SelectFilter Plus technology removes up to 90% of airborne pollen allergens. The Airmid tests prove that this filtration is achieved in just one single pass of air through our SelectFilter, known as the single pass efficiency test. With these irritating particles removed, anyone suffering from hay fever can now enjoy clean air.
Air filter replacement indicator
The filter replacement indicator will switch on when your filter is saturated, so you know that it’s time for a new one. After receiving the new filter, it only takes a few seconds to replace it in the device. So keeping the air that you breathe fresh and clean has never been easier.
Device works automatically so that you can focus on driving
To ensure that you focus on driving, the GoPure 5212 turns on and off automatically with your car engine ignition. The 2-speed fan filtration adjusted by the touching power button depending on your preference. You can just jump in your car, knowing that it will always be an oasis of fresh and clean air.
Easy to install anywhere in your vehicle
With a 4 metre 12 V power cable, you can easily install the GoPure anywhere inside your vehicle. Plug the cable into the cigarette lighter port and then use the mounting accessories to position the device where you prefer, such as the armrest, headrest or under the seats. Wherever you choose to position it, the stylish design will enhance your car’s interior.
Technical Specifications:
Designation – GP5212
Automatic On/Off – YES
Filter replacement indicator – YES
Fragrance dispenser – No
Speed settings – 2, Boost/Silent
Filter Lifetime – 350 hr hr
Technology – Car air purifier
Colour – Black
App enabled – No
Noise level (dbA)(Low) – 40 dBA
Voltage [V] – 12 V DC
Noise level (dbA)(Boost/high) – 55 dBA
Noise level (dbA)(Medium) – 50 dBA
Power [W] – 3
Frequency – N/A
Performance:
Filtration Toluene – CADR of 11 m3/hour
Filtration TVOC – CADR of 11 m3/hour
Filtration Formaldehyde – CADR of 6 m3/hour
Filtration Car exhaust SO2/NO2 – CADR of 7.9 and 13 m3/hour
Filtration of fine particles – CADR of 16 m3/hour
EAN | 8719018009326 |
---|